I virsu
Back
PATIENT OVERBED TABLE
PATIENT OVERBED TABLE PATIENT OVERBED TABLE PATIENT OVERBED TABLE PATIENT OVERBED TABLE PATIENT OVERBED TABLE PATIENT OVERBED TABLE PATIENT OVERBED TABLE PATIENT OVERBED TABLE

PATIENT OVERBED TABLE

Product code
04-6700F

DESCRIPTION

Overbed patient table is intended for use in hospitals, nursing homes, or other places. Due to the ability to change the height of the table and the angle of inclination, it is extremely comfortable for a bedridden patient – while eating, reading, etc. The frame is constructed in a way that the table easily drives under the bed. The product should not be used outdoors or placed on sloping or uneven surfaces!

The counter top is wooden, with raised edges along the entire perimeter of the counter top. Adjustable: angle of inclination – up to 45°, height – from 73 cm to 116 cm. Four wheels of diameter 7.5 cm are equipped with brakes. To turn on the brakes – press the brake lock handle down, to turn it off – lift it up, to lock the table in a position – turn on the brakes of at least three wheels.


Assembly. Screw the wheels into the lower part of the frame (tighten them using the included tool). Fasten the lower stand to the frame part with three screws and secure it with nuts. Insert the upper part of the stand into the counter top, screw the handle so that the counter top can not move. Connect the upper part of the table with the lower one. After choosing the right table height, fasten it with a handle.

Each
overbed patient table is checked in the factory, so only a quality product reaches the user. It is recommended to store the table in a dry place protected from direct sunlight, to wet clean it periodically without using aggressive cleaners, or to cover it.

Please carefully read the Instructions for use and maintenance and the Recommendations for your safety!

 

DOWNLOADS

SPECIFICATION

Data
Maximum load, kg 10
Weight, kg 8,1
Overall height, cm 75,5-125
Overall width, cm 40
Overall length, cm 62
6,5
12,7

SIMILAR PRODUCTS