I virsu
Back
RAISED TOILET SEAT WITH LID, HEIGHT 10 cm
RAISED TOILET SEAT WITH LID, HEIGHT 10 cm RAISED TOILET SEAT WITH LID, HEIGHT 10 cm

RAISED TOILET SEAT WITH LID, HEIGHT 10 cm

Product code
02-7060L4

DESCRIPTION

Kid-Man 10 cm riser for toilet seat with lid is suitable for many toilet bowls of standard dimensions. The seating part is comfortably shaped with a wide cut-out in the front and rear parts. The riser is firmly locked with special brackets located on the sides, without using any special tools

This riser is sold almost ready for use. Before attaching it, check if the toilet bowl is not damaged, lift its lid. Then turn the riser over and install the L-shaped brackets along with the screw-shaped knobs. Turn the knob clockwise until the bracket is in place. Repeat the same with the bracket on the other side of the seat. Do not tighten tightly. Place the riser on the toilet bowl and secure with locking knobs on both sides. Make sure the toilet riser is properly attached to the bowl before each use. When sitting or standing, do not lean on it, do not sit on the lid.




Each riser for the toilet seat with a lid is checked in the factory, so only a quality product reaches the user. It is recommended to regularly clean with non-aggressive household cleaners and warm water, and to dry it off after cleaning.

Please carefully read the Instructions for use and maintenance and the Recommendations for your safety!

DOWNLOADS

SPECIFICATION

Data
Maximum load, kg 225
Weight, kg 1.3
Overall height, cm 10
Overall width, cm 38
Overall length, cm 41
Seat width, cm 36
Seat depth, cm 40
Width x depth of apperture, cm 26 x 21

SIMILAR PRODUCTS