HEIGHT-ADJUSTABLE RISER FOR TOILET SEAT WITH LID

Height-adjustable riser for toilet seat with lid is designed for people weighing up to 120 kg, with torso, upper and lower limb control, and balance disorders, motionless hips and back, without arms. This aid has armrests and is suitable for most toilet bowls with standard dimensions. 

The seating part is comfortably shaped with a wide cutout in the front and rear parts. No tools needed when assembling elevation.

Assembly.
Remove the toilet bowl lid. Put on the riser, and adjust the two mounting bolts, having previously unscrewed the round nuts in order to choose the right width. Then insert the bolts through the holes in the bowl, screw the nuts a little, align the sides of the seat, tighten the nuts. Push the armrests into the brackets until they lock, then fold them down to rest on the support. The height of the raised seat can be adjusted using adjustable brackets. Available heights – 8.5 cm, 12 cm, 15.5 cm. The product comes with a fitted lid, but it can easily be replaced. Make sure the toilet riser is properly attached to the bowl before each use. When sitting or standing, do not lean on it, do not sit on the lid. 



Each height-adjustable riser for the toilet seat with a lid is checked in the factory, so only a quality product reaches the user. It is recommended to regularly clean with non-aggressive household cleaners and warm water, and to dry it off after cleaning.

Please carefully read the Instructions for use and maintenance and the Recommendations for your safety!

User manual